Electricity production coupled to ammonium in a microbial fuel cell

350 210 Stroud Water Research Center

He Z., J. Kan, Y. Wang, Y. Huang, Mansfeld, and K.H. Nealson. 2009. Environmental Science and Technology 43:3391–3397.

doi: 10.1021/es803492c


The production of electricity from ammonium was examined using a rotating-cathode microbial fuel cell (MFC). The addition of ammonium chloride, ammonium sulfate, or ammonium phosphate (monobasic) resulted in electricity generation, while adding sodium chloride, nitrate, or nitrite did not cause any increase in current production. The peak current increased with increasing amount of ammonium addition up to 62.3 mM of ammonium chloride, suggesting that ammonium was involved in electricity generation either directly as the anodic fuel or indirectly as substrates for nitrifiers to produce organic compounds for heterotrophs. Adding nitrate or nitrite with ammonium increased current production compared to solely ammonium addition. Using 16S rRNA-linked molecular analyses, we found ammonium-oxidizing bacteria and denitrifying bacteria on both the anode and cathode electrodes, whereas no anammox bacteria were detected. The dominant ammonium-oxidizing bacteria were closely related to Nitrosomonas europaea. The present MFC achieved an ammonium removal efficiency of 49.2 ± 5.9 or 69.7 ± 3.6%, depending on hydraulic retention time, but exhibited a very low Coulombic efficiency.

Stroud Water Research Center Is Upgrading Its Phone and Voicemail System on Friday, June 25.

You may experience difficulty reaching your party. If you are prompted to leave a message, please do so, and we'll do our best to get the appropriate staff member to respond to you in a timely manner.

We appreciate your support as we improve our communications system.